Dirt Bike Graphic Kits | Motocross Graphic Kits | Custom Decals and Stickers

Dirt Bike Graphic Kits

There are many dirt bike graphic kits to choose from these days. With kits for every bike and every taste available, the hardest part may be choosing exactly which one is right for you. The following tips will come in handy when it comes time to dress up your machine.

Graphic kits are usually very durable, but one important point is to make sure you prepare the surface correctly. Be sure the surface you're applying the graphic to is free from dirt, grease and other foreign material that might prevent the graphic from sticking to your bike. If your plastics are gouged or have deep scratches from heavy wear and tear, it may be best to replace the plastics before applying new graphics. This can extend the life of your new graphics and save you a hassle down the road.

You should try to find graphics that are thick enough to resist wear. Graphics that are at least 20mm thick will give the best results. Some bikers even buy clear sheets to place over their graphic kits to get more life out of them. Depending on how much you ride and your style of riding, your graphics will eventually show signs of wear. Choosing quality dirt bike graphic kits will help you get the most life from yours.

If the bike has stock stickers, it's best to remove them before applying the new ones, even if the new ones completely cover the others. Soap and water can be used, but you may need to use alcohol to get the stickers off completely. Remember to make sure all the glue residue is removed and the surface is completely dry before applying the new graphics.

Friends come in handy when the time comes to apply your new graphics, especially on large pieces like a shroud. Work the sticker a little at a time, peeling the backing and folding it under the graphic until you are sure everything lines up perfectly. Carefully work any air bubbles out from under the sticker with a clean rag. Gently heating the graphic with a hair dryer can help soften it and make it easier to work with. If you end up with an air pocket too large to work out, you can pop it with a pin and then make it smooth.